kSail
kSail
Supporting Sailing
0

Hints and Upgrades 2 - Spreader Ends

24/10/17 03:22 PM Comment(s) By Keith Sammons

Quickly and easily (& cheaply) reduce the damage caused by spreader ends to your mainsails.
Method 1 Carefully cut a cross in an old squash ball before placing over the spreader end and shroud; secure in place with electrical tape.
Method 2 Cut a short piece of 15mm foam pipe lagging. This can be secured vertically over the spreader end and shroud with electrical tape.
Method 3 Purchase a purpose made PVC spreader boot.
Categories -
Equipment
Tags -
    Added to cart
    View CartClose
    - There was an error adding to cart. Please try again.
    Close